image02
image03
image04
image05
image06
image07
image08
image09
image10
image12

Glass Machinery

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

Deca machine
close

MAVER Cutting table

اطلاعات بیشتر
MAVER Cutting table
close

Double machine Ayjr

اطلاعات بیشتر
Double machine Ayjr
close

Double machine Ayjr

اطلاعات بیشتر
Double machine Ayjr
close

Double machine Ayjr

اطلاعات بیشتر
Double machine Ayjr
close

Double machine Ayjr

اطلاعات بیشتر
Double machine Ayjr
close

Cutting Machine
close

Cutting Machine pomp

اطلاعات بیشتر
Cutting Machine pomp
close

Sandblast machine

اطلاعات بیشتر
Sandblast machine
close

The opaque glass

WAVE Machine
close

Glass Straight line Round-Edge Grinder

اطلاعات بیشتر
Glass Straight line Round-Edge Grinder
close

Diamond straight light edging machine BZM9.325

اطلاعات بیشتر
Diamond straight light edging machine BZM9.325
close

Bebeling glass machine 261A

اطلاعات بیشتر
Bebeling glass machine 261A
close

Silicone printing on glass

اطلاعات بیشتر
Silicone printing on glass
close

Special positioning method suitable for printing on all kinds of regular and irregular printing substrate, positioning accuracy is (0.1MM).Adopt Aluminum-Titanium surface for printing table with character of less weight and difficult to be deformed. Table surface is proceed with hard oxidation treatment which enable the table more hard and is not easy to be scratched. Angle of the scraper is adjustable from 0 to 10,which help to last screen life. Up/down function for the scraper and flood bar make installation and change easier. Printing table is in division and with air cushion, suitable for both large & heavy substrate and small & light substrate. PLC control system with man-machine touch panel, automatic trouble shooting display function, make operation easier .Adopt two safety equipment: both sensor and cylinder.

Double machine Ager

اطلاعات بیشتر
Double machine Ager
close



L” Shape Automatic Production Line – Lifting Structure

Composition: Two Double Edging Machines and One L-shape Automatic Transfer Table; the structure is simple and stable, also it is for floor area saving.
It can process the four sides at one time.
The automatic transfer table takes lifting structure, it is widely used for all types of glass, big or small, thick or thin, and takes advantages of high transferring efficiency and flexible con figuratio
n.

MAVER Cutting table

اطلاعات بیشتر
MAVER Cutting table
close

This machine is a very highly autamated for cutting laminated  glass using a cold P V B culting system.this machine considerably decrases laminated glass culting times thanks to its inThis machine is a very highly autamated for cuting novative patent culting process

ORDINERY FLAT GLASS TEMPERING FURNACES

اطلاعات بیشتر
ORDINERY FLAT GLASS TEMPERING FURNACES
close

Ordinery flat glass tempering furnaces.

BT 261 C Machine Brief Description

اطلاعات بیشتر
BT 261 C Machine Brief Description
close

These devices are used for cutting glass and mirror has a 0.8 engine and a motor for turning the glass sticks. Frame it is aluminum. Have is a digital device. Input and output time of the belt is against the cut. Washing Beck left this device is a device for cleaning the carpet. tank Sryvm oxide is the mixer. a 3 Gyrybks electric opening and closing the jaws of the device electrical device consumes 0.25 mA

 

WASHING MACHINE
close

This machine has 3 variable speed low Gyrybks does Vzyad. Has 6 and 6 felt that the diameter of the seal and Fer Fer washing machine and other machines is that glass is being cleaned. Thermostat heater temperature of the device show clear winter and summer is off. door on the rail to open and close.
 
 

 

ZK 80 Machine Brief Description

اطلاعات بیشتر
ZK 80 Machine Brief Description
close

This machine has top/Bottom drill heads.adops timing relay controller and oil damping technology.The centering of drill hole can be positioned by means of mechanical method or laser.pneumatic clampers grip glass with adjustable pressure.The machine has two working status.automatic and manual.ln manual mode.the machine work one cycle . ln automati mode. the machine work continuously.The machine is featured by it high working efficiency.low glass demage and easy operation

BT 20 M Machine brief description

اطلاعات بیشتر
BT 20 M Machine brief description
close

The machine is suitable for grinding and polishing exterior edge of shaped glass.By changing grinding wheel of different shape.flat dege with arris.pencil edge and OG edge can be processed.The height of spindle can be adjusted easily.The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.Motor.stepless regulator.worm gear are in the house of the base.speed is adjusted thought stepless regulator

Glass straight line multi stage edging machine

اطلاعات بیشتر
Glass straight line multi stage edging machine
close

This machine can execute normal bottom edge polishing. It can also make miter edge of 0-45 degree. The five motors can adjust angle from 0 degree to 45 degree for polishing bottom edge and miter edge. Conveyor adopt chain transmitting system consisting of special stretchy rubber pad. Working speed is adjustable through speed regulator. Digital readouts show glass thickness and working speed.

New Arrival

San gun fitting
close

Sand Gun kit
close

hand pinch Grab
close

UV LAMP
close

For faster drying glue and adhesive strength of these

Hand Pinch Grab Two Side

اطلاعات بیشتر
Hand Pinch Grab Two Side
close

it is use for carrie the glass

Glass Cutter
close

cutting glass

MACHINE FITTINGS

Rubber pad
close

Pnematic Triple
close

Supporting frame pully

اطلاعات بیشتر
Supporting frame pully
close

Timed Belt
close

Brush stick spong stick

اطلاعات بیشتر
Brush stick spong stick
close

Sucker for shape Machine

اطلاعات بیشتر
Sucker for shape Machine
close

Aluminium Fitting

اطلاعات بیشتر
Aluminium Fitting
close

Aluminium Fitting

اطلاعات بیشتر
Aluminium Fitting
close

Support Guide Wheel

اطلاعات بیشتر
Support Guide Wheel
close

Support Guide Wheel

اطلاعات بیشتر
Support Guide Wheel
close

Pressure plate
close

Pressure plate
close

Rubber pad
close

Back terak Rubber pad

اطلاعات بیشتر
Back terak Rubber pad
close

Water chuck for drilling machine

اطلاعات بیشتر
Water chuck for drilling machine
close

Pressure plate
close

Water pump
close

Water Pipe/Connector

اطلاعات بیشتر
Water Pipe/Connector
close

Watercover for Edge

اطلاعات بیشتر
Watercover for Edge
close

Motor
close

Diamond can be installed on the machine

Convey chain
close

Diamond can be installed on the machine. The navigation device is a glass jaw position

Rubber pad
close

Diamond chains are placed on

Guide Wheel
close

spare parts of shape glass machine

glass tools

CUTTER HEAD
close

Single-cap suction

اطلاعات بیشتر
Single-cap suction
close

Tin side Detector

اطلاعات بیشتر
Tin side Detector
close

GLASS scratch Removal Kit

اطلاعات بیشتر
GLASS scratch Removal Kit
close

Hand polishing
close

Cutting Machine
close

Rechargeable Glass Cutting Machine(makita)

اطلاعات بیشتر
Rechargeable Glass Cutting Machine(makita)
close

Position Lndicator

اطلاعات بیشتر
Position Lndicator
close

The detection of glass thickness

UV Glue
close

Is used for bonding glass to metal

UV LAMP BULD& Tube

اطلاعات بیشتر
UV LAMP BULD& Tube
close

Is installed on your machine for faster drying glue and more glue strength

Tin side Detector

اطلاعات بیشتر
Tin side Detector
close

These devices are used to diagnose back and glass

polishing stone
close

It is used for make shape, drill and diamond wheels.

small pinch grab

اطلاعات بیشتر
small pinch grab
close

Hand polisher
close

it is use for polishing on bevel glass

Diamond Hand Pad

اطلاعات بیشتر
Diamond Hand Pad
close

Hand Pinch Grab Single Side

اطلاعات بیشتر
Hand Pinch Grab Single Side
close

it is use for carre the glass

Small suction for Circle cutter

اطلاعات بیشتر
Small suction for Circle cutter
close

Cutting Disc
close

It is used for cutting glass.

Cutter Head
close

with 6 wheels, and this is the spare parts for circle cutter.

Small wheel for T-Cutter

اطلاعات بیشتر
Small wheel for T-Cutter
close

Small wheel for T-Cutter

Cutter Head
close

For cutting thickness of glass, A is for 0.3-2mm, B is for 2-6mm, C is for 6-12mm, and E is for 12-19mm.

Circle Cutter
close

It is used for cutting glass.

T-Cutter Head
close

Can choose the cutting thickness of glass: A is for 0.3-2mm, B is for 2-6mm, C is for 6-12mm, and E is for 12-19mm.

Oval Cutter
close

The equipment is suitable for circle and oval cutting with the long axis length a≤122/200cm or a≤60cm and the thickness ≤12mm flat glass plate,and cutting circle with the diameter Ø22~122/200cm or Ø15~60cm. (Note:To Type BLD-122, BLD-200 not suitable when the length"a-b">60cm,or Type BLD-60"a-b">14cm.)

T-Cutter
close

It is used for cutting glass.

Single-Cup Suction

اطلاعات بیشتر
Single-Cup Suction
close

Can supply different color of this style suction(A for this siliver color, B for red color).

2-Cup Suction
close

2-Cup Powerful Suction

اطلاعات بیشتر
2-Cup Powerful Suction
close

Max Suction Lifting Capacity: 135kg; Colour: Black; Usage: it is used for carrying and lifting glass.

3-Cup Powerful Suction

اطلاعات بیشتر
3-Cup Powerful Suction
close

Max Suction Lifting Capacity: 210kg; Colour: Black; Usage: it is used for carrying and lifting glass.

Suction Fittings

اطلاعات بیشتر
Suction Fittings
close

2 kinds size can use on different style of suction lifters.

Angle Adjustable Suction

اطلاعات بیشتر
Angle Adjustable Suction
close

Max Suction Lifting Capacity: 35kg; Usage: it can suck fast tow parts of glass together and make both of two up to certain angle(45~270),so that it’s convenient to be adhered.

Single-Cup Suction

اطلاعات بیشتر
Single-Cup Suction
close

Color: Single; Max suction lifting capacity150KG; Usage: it is used for carrying and lifting glass.

Single-Cup Suction

اطلاعات بیشتر
Single-Cup Suction
close

Color:yellow; Max suction lifting capacity:50KG; Usage: it used for carrying and lifting glass.

2-Cup Suction
close

Color: Yellow; Max suction lifting capacity:100KG Usage: it is used for carring and lifting glass.

3-Cup Suction
close

Color: y.ellow; Max lifting capacity:155kg, and used for carrying and lifting glass

3-Cup Suction
close

It is used for lifting the glass, and max lifting capacity is 155KG

Core Drill

contersink Bit With Thread

اطلاعات بیشتر
contersink Bit With Thread
close

ROTER
close

The holes on the glass

Drill Adapter
close

it is use for change Hight size

Countersink
close

Core Drill
close

it is use make core on the glass

POLISHING WHEEL SERIES

Polishing
close

Polishing 10s40 Q130

اطلاعات بیشتر
Polishing 10s40 Q130
close

Polishing E3
close

Imported 10s polishing wheel

اطلاعات بیشتر
Imported 10s polishing wheel
close

Ceruime Oxide Powder

اطلاعات بیشتر
Ceruime Oxide Powder
close

it is use in beveling machine foe make a shine bevel

Felt
close

it is use in beveling glass machine

spiral felt
close

it is use in beveling glass machine

CE3 polishing wheel

اطلاعات بیشتر
CE3 polishing wheel
close

it is use in last position

X5000 polishing wheel

اطلاعات بیشتر
X5000 polishing wheel
close

it is use in diamond and double edger machine last position

BD Polishing wheels

اطلاعات بیشتر
BD Polishing wheels
close

it is use for shape machine

BK Polishing wheel

اطلاعات بیشتر
BK Polishing wheel
close

it is use in double edger after resin wheel

polishing 10s
close

it is use after resin in diamond straight glass machine

RESIN WHEEL SERIES

Three - Band Resin Wheel

اطلاعات بیشتر
Three - Band Resin Wheel
close

it use in beveling for shape glass machine

Resin Diamond
close

use in idamond glass machine after daimond wheel

Resin Continuse
close

it is use for beveling glass machine

Resin with segment

اطلاعات بیشتر
Resin with segment
close

it is use for beveling glss machine

DIAMOND WHEEL SERIES

Wave edge diamond wheel

اطلاعات بیشتر
Wave edge diamond wheel
close

45 Miter diamond wheel

اطلاعات بیشتر
45 Miter diamond wheel
close

Diamond wheel
close

Diamond cup wheel

اطلاعات بیشتر
Diamond cup wheel
close

OG Diamond Wheel

اطلاعات بیشتر
OG Diamond Wheel
close

45 degree miter diamond wheel

اطلاعات بیشتر
45 degree miter diamond wheel
close

it is use before in 3OG & 2OG & OG

Diamond cup beveling

اطلاعات بیشتر
Diamond cup beveling
close

it is use in beveling glass machine for thin glass

OUT Side segment Diamond wheel

اطلاعات بیشتر
OUT Side segment Diamond wheel
close

it is use in beveling machine

Inside Segement Diamond wheel

اطلاعات بیشتر
Inside Segement Diamond wheel
close

it is use in double edging glass machine pos 2 it is use in diamond glass machine pos 1

full segement diamond wheel

اطلاعات بیشتر
full segement diamond wheel
close

use in first position in double edger glass machine for thick glass